496 results in 0.1274 seconds.
-
The Control Hub is just an Android Device. All the code is built into the generated APK file, and the relevant portions of code are loaded into RAM whenever... -
Yeah, the 2M distance sensor does not work well for the walls.
I'd suggest looking at the MaxBotix MB1242 sensor, I had great success with it.Leave a comment:
-
Are you trying to update through google play? The apps have been pulled from the play store. You can use either the REV Hardware Client or download the...Leave a comment:
-
If the camera stream during init option doesn't suite your needs, probably your best option is going to be scrcpy. It's essentially VNC over ADB (and...Leave a comment:
-
Both SDK v6.2 and v7.0 build fine for me with Arctic Fox Patch 2 on Linux.Leave a comment:
-
SDK v7.0 now supports this, using a custom userspace USB driver instead of Android's native driver.Leave a comment:
-
I realize this isn't directly related to the problem at hand, however, I would highly suggest that you use a P-controller with RUE mode enabled on the...Leave a comment:
-
Nothing says you can't re-implement the "normal" OpMode structure on top of linear
...
Leave a comment:
-
I've trimmed your logs to isolate what we're looking at and removed some of the "noise" logging from the MediaCodec on the Driver Station. Here...Leave a comment:
-
Yes, those are dates, but because the Control Hub does not have a real time clock powered by a watch battery, the Control Hub will boot up with completely...Leave a comment:
-
When the stop command is sent over from the Driver Station, it is held in queue until the main event loop processes it. That can only happen after loop()...Leave a comment:
-
Theoretically a little bit of both. I have not done any quantifiable testing to verify this is the case, though.
The SDK cannot actually...Leave a comment:
-
Yes.
Would suggest switching to a LinearOpMode with your own loop implemented inside runOpMode(). Linear has better stop behavior...Leave a comment:
-
- getCurrent will return the total current draw for the hub.
- getInputVoltage will return the voltage of the 12v power source (connected to the XT30
Leave a comment:
-
Indeed, support for accessing the current monitors was integrated into the official SDK in v5.4. The DcMotorEx class supports has a getCurrent(Curren...Leave a comment:
Leave a comment: