Hello Aravind,
For off season you can use the Modern Robotics Core Control Modules. There are plenty of them available on ebay and plenty...
457 results in 0.1502 seconds.
-
-
Hi Brett, write a diagnostic OpMode that puts the motor in STOP_AND_RESET_ENCODER run mode, and then RUN_WITHOUT_ENCODER run mode and setPower(1.0). ...Leave a comment:
-
I suggest connecting your REV Hub to a Windows PC and then run the REV Hub Interface Software on your PC to see if the touch sensor is working the way...Leave a comment:
-
I believe a student can only be registered to one FTC team at a time (i.e. on one team roster at a time). However, students can switch registration to...Leave a comment:
-
Also, I'm not sure it is a good idea to have four robots emitting various sounds throughout a traditional match. I imagine it would be quite distracting...Last edited by Alec; 01-03-2022, 05:12 PM.Leave a comment:
-
Hello baqwas. You are correct, in most cases you would want to use the BNO055 sensor internal to the REV Hubs.
Prior to the existence of...Leave a comment:
-
Try CRServo.Direction.REVERSE.
By "swap" I mean physically swap servo A and servo B (use A for B and B for A)....Leave a comment:
-
Also double check that both A and B servos are configured as CR Servo and try swapping A and B servos.Leave a comment:
-
Try reproducing the issue with the REV Hub Interface App running on a PC. You can also check the signals coming from the Control Hub and the SPM with...Leave a comment:
-
Hi Jeff, as a sanity check, try running Android Studio in a clean Windows or Ubuntu guest OS using VMware or VirtualBox.Leave a comment:
-
Good question... Most chips cannot be directly connected to a REV hub or other devices. A "breakout board" contains an allowed sensor or controller...Leave a comment:
-
If using a Common Cathode RGB LED, connect the Cathode to any GND, and the RGB Anodes to three PWM pins.
If using a Common Anode RGB LED,...Leave a comment:
-
Rutins, the circuits you've described are unlikely to be legal.
I recommend the MR Color Beacon. Although initially not legal when fist...Leave a comment:
-
Hi Patty, you can connect multiple LEDs to the sensor ports via LED controller or directly to digital out ports. Then command the LEDs on/off in your...Leave a comment:
-
Agree with Lunerwalker2. The Android 6 phones are obsolete junk....Leave a comment:
Leave a comment: